♦Epoxy powder coating: offer the best corrosion protection.
♦Polyester powder coating: offer the highest exterior stability and performance.
♦Our products applied to indoor and outdoor.
♦Our products with SGS,Tuv, Rohs, ISO Certificate.
♦ Our Powder finishes are available in a vast range of colors and finishes.
♦ Including wrinkle effect,sand effect,Antique effect,metallic effect,chrome effect,wood grain,Candy Color Powder ,MDF powder
♦ Our products have a good storage stability ,salt spray resistance,weatherability, exterior durability,
| Type |
Epoxy Powder Coating; Polyester Powder Coating; Epoxy-Polyester Powder Coating |
| Color | RAL&Pantone color |
| Surface Finish | Superior gloss and color retention |
| Particle Size | Average 32-42μm |
| Specific Gravity | 1.2-1.7g per cubic meter |
| Coverage | 8-10 square meters per Kg at 30-90 μm film thickness |
| film thickness | Not less than 100μm |
| Application Voltage | 60-90 KV |
| Gun to Component Distance | 15-30CM |
| Curing Temperature | 180-200℃,10 min-15 min |
| ♦Store in ventilated, dry, clean room, temperature < 25℃ | ♦Relative humidity 50-65% |
| ♦Away from direct sunlight, fire, heat | ♦For best performance, use within 6 months |
RAL3002 Carmine red powder coating powder
This finishing process involves the electrostatic application of a dry powder, a free-floating coating on a surface which then settles into place with the application of heat. This powder coating comes in a number of varieties depending on whether it’s made of polyurethane, polyester, acrylics, straight epoxy, or polyester-epoxy. The outcome of the power coating finishing process is a tough, thick finish, which is harder and more durable than common paints. This kind of coating is popularly used on a number of products, including automobile parts and various household appliances. When powder coating a surface, one of these two processes can be opted for: thermosets and thermoplastics. Thermosetting makes use of chemicals that react to the powder when heated, whereas thermoplastics melt and set into the coating upon heating, and no additional chemicals are involved in the process. Barring this, the two processes are almost similar and appear visually identical. The thermoplastic and thermoset powders are created by binding the powder input, applying heat to the mixture, and rolling out the polymer product, which is then broken down into chips and ground further until a fine powdery state is achieved.
When the powder has been created and is ready to be applied, the surface is readied for application. This normally involves wiping the metal surface clean of any oils or debris that may prevent the powder from attaching completely. Next comes the electrostatic application, where a high voltage electrostatic surge charges the dry powder and the surface. Charging up the powder and the surface in this manner enhances the efficiency of the coating process by as much as 95%, reducing paint wastage and ensuring the product is completely coated. The coated object is then left under a high temperature of 400 degrees for 10 minutes to allow the coating to set onto the surface. The high temperature melts the powder, allowing it to wrap around the object, all the while binding the polymer into heavier network-like polymer finish.
Wet paint and plating excel where powder coating fails. Its first benefit is that it can be used to coat objects that can’t be heated, as the process does not require high temperatures to succeed. The second benefit is the wide range of colors paint finish and plating can produce, allowing for much more custom color works than powder coating. The third advantage it has over powder coating is its ability to produce a thin finish, making it ideal for objects that require one. The final benefit is economic; wet paint is more affordable as a finishing process than powder coating, making it suitable for both large and small finishing applications.
The disadvantage of both wet paint and plating is their lack of durability as compared to powder coating, with both requiring regular maintenance and re-finishing from time to time. The second disadvantage of paint is its inability to achieve an even finish the first time around, with the object requiring several coats to attain an unblemished and even finish. Unlike powder coating which uses powder as the initial coat, this process uses liquid paint which can be tricky to spread across the body of the object keeping the thickness consistent.
Powder coating is better if you need a durable protective finish on your metal object. Painting is better if you need to paint your metal object inexpensively. Simply put, this is one battle that has no winners. Which one is best for you will depend on the kind of application, and the products involved, along with several other factors. It is always advisable to consult a professional for an expert opinion and they will lay out all the possibilities for you with regard to your needs and of your product and customers. All three finishing methods will provide an appealing and functional finish for your product.
On average, painting costs about $1,900. Car painting costs ranged from $300 to $3,500 for the US in 2019. Painting is common technique that uses wet paint vs a dry coating to paint the surface of the product. It’s a simpler process because you don’t need to cure paint.
The average cost of powder coating is about $2,000 vs the average cost of painting which is about $1,900. Powder coating is a great alternative to painting. Powder coating is mostly used when you need a durable protective finish added to a metal product. It’s highly used to apply finishes to vehicles.
On average, powder coating costs about $2,000. Car powder coating costs ranged from $1,000 to $3,000 in the US for 2019.
No, but good quantity comes with good price.
We recommend the order quantity for regular products of Yaxiong to fit at least one 20ft. container, which is about 15 tons.
Design drawing → Confirm drawing → Quotation → PI → Confirm PI → Arrange 30% deposit → Manufacture → QC inspect → Pay balance → Shipping.
(1) Your inquiry related to our products or price will be replied in 12 hours.
(2) Well-trained and experienced staffs to answer all your inquiries in fluent English.
(3) OEM & ODM, any your customized racking we can help you to design product.
(4) We have very experienced professional engineers to make best solutions.
